Explosion-proof analysis shelterDesignUseInPetrochemicalindustry的Explosion Hazardous AreaRegion，Configure了power distributionsystem、Alarmcontrolsystem、GasExploreMeasuresystem、Lighting System And IndoorTemperatureControlsystem，EveryProductionsystem的compositionAlladoptIndependentlyRemain的explosion-proofComponents，FoundationsolutionByHenan Hualong Electrical Equipment Co., Ltdprovide。

Explosion-proof analysis shelterDesignsolution

Overall Dimensions: 3000（L）×4000（W）×2700（H）mm (IndoorNetHigh2700mm)，UseAspectsArea12StandardAspect，FrameRackFormstructure，DomesticOverseasWall And RoofTopByStainless SteelPlateAssembleInstallation铆Welding And Cost，OverseasWall And RoomTopadopt1.5mmThick304SSMaterial，DomesticWalladopt1.5mmThick304 Stainless SteelMaterial，RoofTopInclineObliqueDegreeFor1:20，WallThick70mm，DomesticOverseasWall And RoofTop And RoomTopPositionAreaFillStuff75mmThickFlame RetardantTypeAccumulateAmineFatProtectionTemperatureMaterial。

The enclosure features an outward-opening single door, non-folding structure, with thermal insulation. Net dimensions are 2000(H)×900(W)mm, using the same interior and exterior materials as the enclosure, with stainless steel hinges and screws. The insulation layer is 50mm thick, and rubber sealing strips are fitted between the door and wall, rated for temperatures from -40°C to +60°C. The door includes a 400×600mm explosion-proof glass observation window, a damped limiting door closer, and a push-bar emergency exit lock. The exterior has a lock and handle, and a rain shield above the door. The floor is 3mm steel plate covered with floor vinyl.

The external cylinder placement, junction boxes, and various manual switches are located outside the shelter. The top of the installation position has a rain shield extending outward 600mm, made of 304SS plate, serving to block rain and shade from sunlight。To facilitate lifting and transportation of the shelter, the shelter roof is equipped with lifting lugs for hoisting。The mechanical strength meets the requirements for lifting, towing, transportation, and supporting wall-mounted equipment installation. The load-bearing capacity of the internal and external walls is 500 kg/m², and the minimum load-bearing capacity of the roof is 250 kg/m²。

The shelter is sealed, rainproof, dustproof, and heat-insulated, with an enclosure protection rating of IP65. Gas cylinder fixing brackets and gas cylinder guardrails are provided on the outside。

Explosion-proof analysis shelterConfiguration List