Explosion-proof control boxMoreLess钱OneProduction

aboutExplosion-proof control boxMoreLess钱OneProductionInvincibleSameConfigureWithInvincibleSame的price。In terms of price, since the enclosure is produced according to the wiring diagram, there is no fixed price。Different configurations have different prices。

The price needs to be estimated based on the production drawings。There are many factors affecting the price, such as the material of the enclosure, the brand of internal components, the quantity of components, the number of panel openings, the quality of optional panel components, indicator lights, buttons, and the number of selector switches.。

Another point is the explosion-proof rating of the explosion-proof control box.。The manufacturing processes for ⅡB and ⅡC are different; the enclosure manufacturing process for ⅡC is more complex, so the price is naturally higher.。

Explosion-proof control boxHousingWeldingPrecautions

Explosion-proof control boxexplosion-proofSteel PlatemustadoptArc WeldingWelding， Due To ShouldProductsuitable for hazardouslocation， So Explosion-proof Performance Very important， So inUsersThickSteel Plate WeldingExplosion-proof control boxHousingWhen，ShouldnoteNextColumnRegulations:

1、operationpersonnelmust戴著nonDamage的PasteMobileSet，stationinInsulationLayerwoodPlatformSimensSupremeActualPracticalOperate。When the MIG welding machine is in use or after the power switch is turned on, the explosion-proof control box should be closed, and it is strictly forbidden to open it arbitrarily.。

2. It is strictly forbidden to use wet gloves or wet hands to close the switch again.。When closing the switch, one should stand to the side of the switch box.。Switch OnAfter-salesShouldPay AttentionClosed闸Box。The MIG welding machine cannot be started first and then have the switch closed, nor can electric welding be performed on the MIG welding machine.。

3. The explosion-proof control box should have anti-contamination and waterproof characteristics, and it is strictly forbidden to pile up dirt around the box.。The ground where the MIG welding machine and the explosion-proof control box are located must not have water seepage.。

4. Protective goggles must be worn during actual operation.。

5. It is forbidden to place flammable and explosive items around the work area.。

6、CriticalHandleSteelComponentsnaStrong。Steel parts should be stacked neatly, not too high, leaving safe passageways.。

The above is an introduction to the cost of an explosion-proof control cabinet and precautions for shell welding of explosion-proof control cabinets. For more related information, please visit Hualong explosion-proof at www.hlfbdq.com.