When installing the explosion-proof pressurized cabinet, commissioning must first be carried out in a safe environment. After commissioning, it should be transported to the explosion-proof area for installation, and placed on a flat location without significant vibration.。inTransportation、During Installation，Strictly ProhibitGreaterWidthDegreeInclineOblique，Strictly Prohibitadopt撬、锤Etc.methodAdvanced 搬Interaction，nothen， May AffectExplosion-proof positive pressure cabinet的Sealing PerformanceAbility，conductCausingnonAlgorithmachieveexplosion-proofEnergy-savingEffect。

Explosion-proof pressurized cabinets are generally made in wall-mounted or floor-standing styles based on their external dimensions. They are equipped with mounting angles at the factory, and users can secure them by driving expansion bolts.。Explosion-proof pressurized cabinets installed outdoors must have rain protection measures, typically by adding a rain shelter or rain cover.。

Try to choose an open and spacious environment for installation. At the same time, plan the incoming and outgoing lines and air inlet pipelines. Where conditions permit, use separate pipelines as much as possible and do not mix them with other equipment. This is especially beneficial when there are multiple explosion-proof pressurized cabinets, as it facilitates unified management, operation, maintenance, and repair.。

complete setElectricalProcurement的User，Explosion-proof positive pressure cabinetManufacturerinequipmentOutputFactoryWhenalreadyManagementCommissioningDuringElectricalPart，UserneedSimpleUnitCommissioning Namely Up；OnlyProcurementexplosion-proofcabinet body，ElectricalcomponentSelf Installation的UserneednoteOneNextSeveralPoint。

1. If the electrical components in the cabinet's distribution system are installed by the user, the user must install and debug them in a safe area.。

2. Do not remove or dismantle the electrical components on the panel, so as not to affect the air-tightness performance of the cabinet body.。

3. A low-pressure interlocking contactor is installed inside the pressurized chamber. Users should connect the power supply of the main distribution system through the low-pressure interlocking contactor for interlocking, so that when the pressure inside the pressurized chamber is too low, the main distribution power supply can be cut off through the contactor.。

4. When wiring, users should pay attention to the sealing of each incoming and outgoing cable, and use explosion-proof putty for appropriate sealing treatment according to the tightness of each cable.。

5. After wiring and debugging, when closing each door, users must ensure its sealing performance.。

6. The grounding wire of the explosion-proof pressurized cabinet must be connected to the dedicated grounding screw as required.。